HL-660

Languages: PCL 5 (HP LaserJet 4 emulation), ESC/P (Epson FX-850 emulation), IBM Proprinter XL
Optional: BR-Script 2 (PostScript 2 language emulation)

Technology: Monochrome Laser

Speed: 6 PPM

Memory: 2MB standard, exp. to 10MB

Graphics: 600 x 600 dpi

Brother HL-660 Fonts

Internal PCL Fonts

Typeface	Size	Variations	Symbol Set
Line Printer	8.5 pt. (16.67 pitch)	Medium Upright	*
Courier	Scalable	Medium Upright	+
		Bold Upright
		Medium Italic
		Bold Italic
CG Times	Scalable	Medium Upright	+
		Bold Upright
		Medium Italic
		Bold Italic
CG Omega	Scalable	Medium Upright	+
		Bold Upright
		Medium Italic
		Bold Italic
Coronet	Scalable	Medium Italic	**
Clarendon Condensed	Scalable	Bold Upright	**
Univers	Scalable	Medium Upright	+
		Bold Upright
		Medium Italic
		Bold Italic
Univers Condensed	Scalable	Medium Upright	**
		Bold Upright
		Medium Italic
		Bold Italic
Antique Olive	Scalable	Medium Upright	**
		Bold Upright
		Medium Italic
Garamond Antiqua	Scalable	Medium Upright	**
Garamond Halbfett	Scalable	Bold Upright	**
Garamond Kursiv	Scalable	Medium Italic	**
Garamond Kursiv Halbfett	Scalable	Bold Italic	**
Marigold	Scalable	Medium Upright	**
Albertus	Scalable	Medium Upright	**
Albertus Extra Bold	Scalable	Bold Upright	**
Arial	Scalable	Medium Upright	+
		Bold Upright
		Medium Italic
		Bold Italic
Times New Roman	Scalable	Medium Upright	+
		Bold Upright
		Medium Italic
		Bold Italic
Letter Gothic	Scalable	Medium Upright	+
		Bold Upright
		Medium Italic
Symbol	Scalable	Medium Upright	N/A
Wingdings	Scalable	Medium Upright	N/A

*All Fonts are available in PC-8, Roman-8, ECMA-94, PC-850, PC-8, Danish/Norwegian, and Legal. All of these can be used with ISO sets 2, 4, 6, 10, 11, 14, 15, 16, 17, 21, 25, 57, 60, 61, 69, 84, 85, HP Spanish and HP German.

**Scalable Fonts are available in above listed symbol sets and in Windows 3.1 Latin 1 (ANSI), DeskTop, PS Text, Ventura International, Ventura US, Microsoft Publishing, Windows 3.0 Latin 1 (previously called Windows), and MC Text.

+Intellifonts also available in ISO 8859-2 Latin 2, ISO 8859-9 Latin 5, Windows 3.1 Latin 2, Windows 3.1 Latin 5, Math-8, PS Math, Ventura Math and PI Font.

Brother HL-660 Paper Handling

Standard: 200-sheet multi-purpose sheet feeder

Loading the Multi-Purpose Sheet Feeder

Open the multi-purpose sheet feeder cover.
Load paper in the multi-purpose sheet feeder. The feeder can hold up to 200 sheets of plain paper or up to 10 envelopes. Excessive sheets may cause paper jams. Make sure that the paper is stacked below the arrow mark.
Move the paper guide to fit the paper width.
Close the multi-purpose sheet feeder cover.
Open the output tray and extend the support wire.

Using Manual Feed

The multi-purpose sheet feeder also has a manual feed slot. You can manually load paper sheet by sheet into this slot. You do not need to remove paper from the multi-purpose sheet feeder.

Make sure that you have selected the manual paper feed, paper size and orientation in your software application.
Choose a print command to send a file or document to the printer. If the printer is in sleep mode, receiving data wakes it up. A blinking MANUAL lamp alerts you to insert a sheet of paper into the manual paper feed slot.
Holding the selected size of paper in the selected orientation, place the side of the paper you wish to print on face down into the manual feed slot. Align the paper to the left side of the feed slot, insert it all the way into the manual feed slot. Move the paper guide of the manual feed slot to the paper width you are using.
Press the FF/CONT switch. The printer loads the paper from the manual feed slot and starts printing. After the printer ejects the first page, the MANUAL lamp blinks again to alert you to insert the paper.
Insert the next sheet of paper all the way into the manual feed slot, aligning it as straight as possible.
Press the FF/CONT switch for the next page. You need to press the FF/CONT switch for every sheet you load manually. Repeat steps 5 and 6 until you have printed all the pages.

Brother HL-660 Messages

Light	Printer Status
READY off	The power cord is not plugged into the AC outlet or the printer is in sleep mode.
READY blinking fast	The printer is warming up.
READY blinking slow	The printer is off-line.
READY on	The printer is on-line.
DATA off	The printer has no print data.
DATA blinking	The printer is receiving data from the computer or the printer is processing data in memory.
DATA on	Print data remains in the printer memory. If the DATA light is on for a long period of time and nothing has printed, you need to press the SELECT switch to turn the printer off-line and press the FF/CONT switch to print the data.
MANUAL off	The printer is set to print continuously by loading paper from the multipurpose sheet feeder.
MANUAL blinking	Manual paper feed is selected and the printer prompts you to insert paper in the manual feed slot and press the FF/CONT switch.
ALARM blinking	The red ALARM lamp blinks to indicate a printer error status. If any error occurs, the printer indicates the error by blinking the ALARM lamp with another lamp or by printing an error report.

Alarm Panel Messages

Alarm blinking and:	Error	Action
PAPER blinking	Paper Jam or Paper empty or Misfeed	Clear the paper jam and press the FF/CONT switch if the printer does not automatically resume printing. Load paper in the printer and press the FF/CONT switch. Reinstall the paper and press the FF/CONT switch.
COVER blinking	Cover Open	Close the top cover of the printer or install the multipurpose sheet feeder into the printer firmly.
TONER blinking	Toner low	Replace the toner cartridge with a new one.

Printed Error Messages

Error	Action
Memory Full	Press the FF/CONT switch to print the data remaining in the printer. If you are using the Windows driver, try again after setting the TrueType mode to "Print as Graphics" Expand the printer memory with the optional memory board. Reduce the print resolution or reduce the complexity of the document.
Print Overrun	Press the FF/CONT switch to print the data remaining in the printer. If you use the Windows driver, try again after setting the TrueType mode to "Print as Graphics". If this does not clear the error, reduce the complexity of your document or reduce the print resolution.
Centronics Interface Line Error	Press the FF/CONT switch to resume printing. Check that the connection between your computer and printer is secure and correct, and check the interface cable.
Serial Interface Framing Error	Press the FF/CONT switch to resume printing. Check the communication parameters settings such as baud rate and stop bit on both your computer and printer.
Serial Interface Parity Error	Press the FF/CONT switch to resume printing. Check the communication parameters settings such as baud rate and stop bit on both your computer and printer.
Serial Interface Overrun Error	Press the FF/CONT switch to resume printing. The interface hardware may be damaged, consult your dealer.
Serial Interface Input Buffer Overflow	Press the FF/CONT switch to resume printing. Check the communication parameters settings such as baud rate and stop bit on both your computer and printer. If the error occurs again, the interface hardware may be damaged, consult your dealer.

Service Call Errors

If an unrecoverable error occurs, the printer indicates the need for a service call by lighting all the lamps and then a combination indicating the nature of the service error alternately.

If you see a service call indication, reset the printer using the RESET switch or by unplugging the power cord and then plugging it in again.

If you cannot clear the error and see the same service call indication after resetting the printer, consult your dealer or authorized service representative.

Brother HL-660 Interfaces

Parallel

Availability: Standard
Connection: Centronics

Serial

Availability: Optional interface board
Connection: 8-pin DIN, RS-422A or RS-232C switchable (needs ImageWriter cable)
Configuration: Dip Switches

Serial Interface Parameters Settings

Switch	Parameter	Position	Setting
1	Baud Rate	see below
2	Baud Rate	see below
3	Data Length	ON	7 bits
		OFF	8 bits
4	Stop Bit	ON	2 bits
		OFF	1 bit
5	Parity	see below
6	Parity	see below
7	Protocol	ON	Xon/Xoff + DTR
		OFF	DTR Only
8	Robust Xon	ON	On
		OFF	Off

Baud Rate Settings

Switch 1	Switch 2	RS-422A Setting	RS-232C Setting
OFF	OFF	57600	9600
ON	OFF	9600	4800
OFF	ON	1200	1200
ON	ON	19200	19200

Parity Settings

Switch 5	Switch 6	Parity
ON	ON	Odd
ON	OFF	Even
OFF	--	None