^TM Projet II

Language: HP PCL 3 (DeskJet Plus emulation) Speed: 2-3 PPM Method: Monochrome InkJet Memory: 128K (optional 256K memory card used for printer soft fonts and macros only)

Citizen Projet II Fonts

Internal Fonts

Citizen Projet II Paper Handling

Standard Feeder: 70-sheet auto sheet feeder

Using the built-in sheet feeder:

1. Move the lower lever (B) on the front of the printer to the right to release the lateral guides which keep the paper centered.
   
2. Lower and move to the left the upper lever (A) to open the paper tray.
3. Pull out the extendible rear guide on the paper tray to simplify paper loading.
   
4. Fan the paper thouroughly.
5. Load the paper in the tray, pushing it carefully until stops against the feed rollers inside the tray.
6. Position the rear guide against the rear edge of the paper.
7. Once you have inserted the paper, move the lower lever (B) on the front of the printer to the left to close the lateral guides and center the paper.
   
8. Move the upper lever (A) to the right and raise it.

Citizen Projet II Settings

To access the set-up selectors (dip switches), open the top cover of the printer and the selector cover. On the inside of the top cover, there is an engraved template which indicates the parameter assigned to each selector. The default factory settings are all switches set to off (down).

To redefine the programmable parameters using the printer set-up procedure, the printer must be switched off. Once you have completed the selection of the parameter values you require, close the selector cover and the top cover, then switch on the printer.

The 33 selectors are assigned to the programmable parameters singly, or in some cases, in groups. From the left, the selectors are grouped as follows:

• A group of 6 selectors, number 1 through 6 which select the font.
• 14 selectors, indicated alphabetically, which select individual print attributes and features.
• a group of 3 selectors, numbered 1 to 3, which select the paper format
• a group of 6 selectors, numbered 1 to 6, which select the character set.
• a group of 4 selectors, numbered 1 to 4, which are reserved.

Selecting the default font:

The first 6 selectors define the print font to be used. When selecting a resident font other than the default (Courier), ONLY the specific selector should be raised, the other 5 must all remain down.

Font	s1	s2	s3	s4	s5	s6
Courier 10	off	off	off	off	off	off
Courier 16.6	off	on	off	off	off	off
Letter Gothic 10	off	off	on	off	off	off
Letter Gothic 12	off	off	off	on	off	off
Letter Gothic 16.6	off	off	off	off	on	off
Times Nordic	off	off	off	off	off	on
External Fonts	on	off	off	off	off	off

Selecting Print Attributes and other features:

The features assigned to selectors A to N, engraved on the inside of the front cover, are the alternative parameter values (they are the values implemented when the corresponding selector is set to ON.

The implementation of parameters A, B, and C will depend on the font selected with the first six selectors. For example, if the Times Nordic font is selected, the selection of landscape will be ignored since the Times Nordic font is only available in portrait.

Selector	Feature	OFF	ON
A	Print Style	Upright	Italic
B	Print Pitch	Normal	Compressed
C	Print Orientation	Portrait	Landscape
D	Print Quality	Letter Quality	Draft
E	Paper Feed Device	Paper Tray	Manual
F	Perforation Skip	Enabled	Disabled
G	Text Scale Mode	Disabled	Enabled
H	Graphic Density	75 DPI	300 DPI
I	Automatic Line Feed	Disabled	Enabled
L	Ink Detection	Enabled	Disabled
M	Ink Save Mode (Graphics)	Enabled	Disabled
N	Ink Save Mode (Text)	Enabled	Disabled
O	Reserved	Default	Do Not Use
P	Reserved	Default	Do Not Use

Selecting Paper Size:

Paper Size	S1	S2	S3
A4	off	off	off
Letter	off	off	on
Legal	off	on	off
Envelope	off	on	on
Free	on	on	on

Selecting the Character Set:

Character Set	S1	S2	S3	S4	S5	S6
CP 437 International	off	off	off	off	off	off
HP Roman 8	off	off	off	off	on	off
PC 8 Denmark/Norway	off	off	off	on	off	off
CP 850 (mulitlingual)	off	off	off	on	on	off
ECMA 94 - Latin 1	off	off	on	off	off	off
ISO 4 - United Kingdom	off	off	on	off	on	off
ISO 21 - Germany	off	off	on	on	off	off
ISO 69 - France	off	off	on	on	on	off
ISO 15 - Italy	off	on	off	off	off	off
ISO 60 - Norway	off	on	off	off	on	off
ISO 61 - Norway 2	off	on	off	on	off	off
ISO 11 - Sweden Names	off	on	off	on	on	off
ISO 10 - Sweden	off	on	on	off	off	off
ISO 17 - Spain	off	on	on	off	on	off
ISO 6 - USASCII	off	on	on	on	off	off
ISO 2 - IRV	off	on	on	on	on	off
ISO 16 - Portugal	on	off	off	off	off	off
ISO 14 - JIS ASCII	on	off	off	off	on	off
Legal	on	off	off	on	off	off
CP 860 - Portugal	on	off	off	on	on	off
Danish OPE	on	off	on	off	off	off
Unix International	on	off	on	off	on	off
Danish OPE II	on	off	on	on	off	off
Spain II	on	off	on	on	on	off
CP 863 - French Canadian	on	on	off	off	off	off
PC WIN (ANSI)	on	on	off	off	on	off
CP 852	off	off	off	off	off	on
ISO 8859/2	off	off	off	off	on	on
PC WIN (East European)	off	off	off	on	off	on
CP 857	off	off	off	on	on	on
ISO 8859/9	off	off	on	off	off	on
PC WIN (Turkish)	off	off	on	off	on	on
CP 866	off	off	on	on	off	on
CP 855	off	off	on	on	on	on
ISO 8859/5	off	on	off	off	off	on
PC WIN (Cyrillic)	off	on	off	off	on	on
CP 210	off	on	off	on	off	on
CP 851	off	on	off	on	on	on
ISO 8859/7	off	on	on	off	off	on
PC WIN (Greek)	off	on	on	off	on	on
CP 862	off	on	on	on	off	on
ISO 8859/8	off	on	on	on	on	on
Default Set in Card	on	on	on	on	on	on

Citizen Projet II Interfaces

Parallel

Availability: Standard

Connection: Centronics

Activation: Automatic