Microline 390/391 Microline 390/391  |
Language:
Epson, IBM (E/I Model)* Okidata Standard (OKI model)* Speed: Draft 270 CPSLQ 90 CPS Graphics: 60,180, 360 DPI No. of Pins: 24 |
* To determine the model, do a self test by holding down the LF button while turning the printer on. The first line will indicate the model.
Internal Fonts
| Typeface | Quality | Height | Pitches |
| Utility | Draft | 6, 8, 10, 12, 14, 15 and 16 pts. | 20, 14, 12, 10, 8.5, 8 and 7.5 CPI and proportional |
| Courier | Letter Quality | 6, 8, 10, 12, 14, 15 and 16 pts. | 20, 14, 12, 10, 8.5, 8 and 7.5 CPI and proportional |
| Prestige | Letter Quality | 6, 8, 10, 12, 14, 15 and 16 pts. | 20, 14, 12, 10, 8.5, 8 and 7.5 CPI and proportional |
| Letter Gothic | Letter Quality | 6, 8, 10, 12, 14, 15 and 16 pts. | 20, 14, 12, 10, 8.5, 8 and 7.5 CPI and proportional |
| Resident | Letter Quality | 6, 8, 10, 12, 14, 15 and 16 pts. | 20, 14, 12, 10, 8.5, 8 and 7.5 CPI and proportional |
Continuous Feeding
Tractor Feed: Standard
Manual Feeding
Through the guides on top.
Menu Setup
To enter Menu mode press the MODE switch. Press GROUP switch to print first Menu item.
Upon entering Menu mode, the first GROUP - ITEM - SET is printed.
Use the GROUP switch to change groups. Use the ITEM switch to switch Items. Use the SET button to switch settings.
To exit Menu mode, press the MODE switch again.
Pressing the MODE/SEL switches simultaneously on power up will reset the Menu back to its factory.
The interface connector is located on the back of the printer.
Parallel
Availability: Standard
Connection: Centronics Female
Activation: SelecType Menu
Serial
Availability: Standard
Connection: RS-232 Serial interface
Activation: SelecType Menu