Phaser 300X

Language: PostScript

Method: Color Solid Ink

Graphics: 300dpi

Autorotation: Yes

Duplex: Not Available

RET: Not Available

Tektronix Phaser 300X Fonts

Internal Fonts (Postscript)

Typeface	Size	Variation	Orientation	Symbol Set

Times-Roman	Scalable	Plain	P & L	Adobe PS
	Scalable	Roman Italic	P & L	Adobe PS
	Scalable	Bold	P & L	Adobe PS
	Scalable	Bold Italic	P & L	Adobe PS

Courier	Scalable	Plain	P & L	Adobe PS
	Scalable	Bold	P & L	Adobe PS
	Scalable	Oblique	P & L	Adobe PS
	Scalable	Bold Oblique	P & L	Adobe PS

Helvetica	Scalable	Plain	P & L	Adobe PS
	Scalable	Bold	P & L	Adobe PS
	Scalable	Oblique	P & L	Adobe PS
	Scalable	Bold Oblique	P & L	Adobe PS

Helvetica Narrow	Scalable	Plain	P & L	Adobe PS
	Scalable	Bold	P & L	Adobe PS
	Scalable	Oblique	P & L	Adobe PS
	Scalable	Bold Oblique	P & L	Adobe PS

Symbols	Scalable	Plain	P & L	Symbol
Palatino	Scalable	Roman	P & L	Adobe PS
	Scalable	Bold	P & L	Adobe PS
	Scalable	Italic	P & L	Adobe PS
	Scalable	Bold Italic	P & L	Adobe PS

New Century Schoolbook	Scalable	Plain	P & L	Adobe PS
	Scalable	Italic	P & L	Adobe PS
	Scalable	Bold	P & L	Adobe PS
	Scalable	Bold Italic	P & L	Adobe PS

ITC Bookman	Scalable	Light	P & L	Adobe PS
	Scalable	Light Italic	P & L	Adobe PS
	Scalable	Demi	P & L	Adobe PS
	Scalable	Demi Italic	P & L	Adobe PS

ITC Zapf Chancery	Scalable	Medium Italic	P & L	Adobe PS
ITC Avant Garde	Scalable	Book	P & L	Adobe PS
	Scalable	Demi	P & L	Adobe PS
	Scalable	Book Oblique	P & L	Adobe PS
	Scalable	Demi Oblique	P & L	Adobe PS

ITC Zapf Dingbats	Scalable	Plain	P & L	Dingbats PS

Tektronix Phaser 300X Interfaces

The interfaces for the TEK-Phaser III PXi are located on the back side of the printer.

Parallel

Availability: Standard

Connection: High-speed parallel

Activation: Automatic

Serial

Availability: Standard

Connection: RS-232-C serial

Activation: Automatic

AppleTalk

Availability: Standard

Connection: 9 pin AppleTalk/LocalTalk

Activation: Automatic

Ethernet

Availability: Standard

Connection:

Activation: Refer to Network Utilities Guide

Tektronix Phaser 300X Paper Handling

Unprintable Region

Left: .2 in. Top: .2 in.

Right: .2 in. Bottom: .28 in.

Continuous Feeding

Standard Trays A standard tray is provided which adjusts to accept letter or legal size paper. An additional tray is available to accept up to 12x18 inch paper.

Manual Feeding

The printer can manually accept paper sizes from 4x6 up to 12x18.

Tektronix Phaser 300X Messages

Message	Action
Busy <message>	No user action required.
Continue? See manual	You have pressed the CLEAN PRINT HEAD button more than three times. See “Using the CLEAN PRINT HEAD button.” If you want to continue cleaning and purging more ink, press the button again.
Initializing	No user action required.
Interface Error	Turn the printer off and back on again.
Jam -- <location>	Remove the paper jam. See the label under the top cover for the location of the jam. The paper could be too thick or too thin.
Jam - Paper long	The paper is too long. Remove the jammed paper. Use shorter paper.
Jam - Paper Narrow	The paper is too narrow. Remove the jammed paper. Use wider paper.
Jam - Paper short	The paper is too short. Remove the jammed paper. Use longer paper.
Printing	No user action required.
Processing Data	No user action required.
Pull ink load lever	After you add a Color Stick, close the ink cover and pull down the ink load lever.
Ready	No user action required. The printer is ready to print.
Standby	No user action required.
Stopped - Add <color>	The printer needs ink of this color. Add another ink Color Stick.
Stopped - Add paper	Add paper, or install the paper tray.
Stopped - Close rear door	Close the rear cover
Stopped - Close top door	Close the top cover
Stopped - Close waste bin	Close the waste bin.
Stopped - empty waste bin	The waste bin needs to be emptied
Stopped - for hand feed	Insert paper for manual feed
Stopped - remove <color>	The printer does not need ink of this color. Remove the ink Color Stick
System Failure Service Required	Turn the printer off then on again. If the failure persists, call you dealer, or Tektronix service in the US only at 1-800-547-8949.
Utilities	The printer is in Utilities mode. You can use this mode to set the language on the front panel, clean the printer, and check the copy count.
Wait to add <color>	Wait up to 3 minutes before adding another ink Color Stick
Waiting for data	No user action required.